⚬ Services
Code
OSS00156W
$240USD    Buy Now 

ID Tag
Rb943-240509-WS

Immunogen
A synthetic peptide from the n-terminal region of human Nav1.8 conjugated to blue carrier protein was used as the antigen.

Accession

Also known
Sodium channel protein type X subunit alpha, Voltage-gated sodium channel subunit alpha Nav1.8, Peripheral nerve sodium channel 3, hPN3, SCN10A, PN3

Target
FUNCTION: This protein mediates the voltage-dependent sodium ion permeability of excitable membranes. Assuming opened or closed conformations in response to the voltage difference across the membrane, the protein forms a sodium-selective channel through which sodium ions may pass in accordance with their electrochemical gradient. It is a tetrodotoxin-resistant sodium channel isoform. Its electrophysiological properties vary depending on the type of the associated beta subunits (in vitro). Plays a role in neuropathic pain mechanisms.
Tissue specificity: Expressed in the dorsal root ganglia and sciatic nerve.
SUBCELLULAR LOCATION: Cell membrane; Multi-pass membrane protein. Note: It can be translocated to the extracellular membrane through association with S100A10.

Storage
Maintain the lyophilised/reconstituted antibodies frozen at -20°C for long term storage and refrigerated at 2-8°C for a shorter term. When reconstituting, glycerol (1:1) may be added for an additional stability. Avoid freeze and thaw cycles.

Expiry Date
12 months after reconstitution

Shipping
This item will be shipped to you at ambient temperature in a lyophilised form.

References
1. Rabert D.K, et al. Pain 78:107-114(1998)
2. Muzny D.M, et al. Nature 440:1194-1198(2006)

Limitation
For research use only

Code
OSS00156W
$240USD    Buy Now 

Unit size
100 µl

Conjugate
Unconjugated antibody

Host
NZ white rabbit

Purity
Whole serum

Clonality
Polyclonal

Isotype
Polyclonal, whole serum

Applications
IHC, WB. A dilution of 1 : 300 to 1 : 2000 is recommended. The optimal dilution should be determined by the end user. Not yet tested in other applications.

Specificity
Specific for Nav1.8.

Spcs X-react.
Human. Other species not yet tested.

Format
Lyophilised

Reconstitution
Reconstitute in 100 µl of sterile water. Centrifuge to remove any insoluble material.

Note
Control peptide is available at $120 per 50 μg. Please enquire sales@osenses.com

Code
OSS00156W
$240USD    Buy Now 


Rabbit antibody to Nav1.8 IHC on paraffin sections of human thyroid tissue using Rabbit antibody to Nav1.8: OSS00156W. HIER: 1 mM EDTA, pH 8 for 20 min using Thermo PT Module. Blocking: 0.2% LFDM in TBST filtered thru 0.2 µm. Detection was done using Novolink HRP polymer from Leica following manufacturer's instructions. Primary antibody: dilution 1: 1000, incubated 30 min at RT (using Autostainer) Sections were counterstained with Harris Hematoxylin.
Rabbit antibody to Nav1.8 IHC on paraffin sections of human skin tissue using Rabbit antibody to Nav1.8: OSS00156W. HIER: 1 mM EDTA, pH 8 for 20 min using Thermo PT Module. Blocking: 0.2% LFDM in TBST filtered thru 0.2 µm. Detection was done using Novolink HRP polymer from Leica following manufacturer's instructions. Primary antibody: dilution 1: 1000, incubated 30 min at RT (using Autostainer) Sections were counterstained with Harris Hematoxylin.
Rabbit antibody to Nav1.8 IHC on paraffin sections of human appendix tissue using Rabbit antibody to Nav1.8: OSS00156W. HIER: 1 mM EDTA, pH 8 for 20 min using Thermo PT Module. Blocking: 0.2% LFDM in TBST filtered thru 0.2 µm. Detection was done using Novolink HRP polymer from Leica following manufacturer's instructions. Primary antibody: dilution 1: 1000, incubated 30 min at RT (using Autostainer) Sections were counterstained with Harris Hematoxylin.
Rabbit antibody to Nav1.8 IHC on paraffin sections of human stomach tissue using Rabbit antibody to Nav1.8: OSS00156W. HIER: 1 mM EDTA, pH 8 for 20 min using Thermo PT Module. Blocking: 0.2% LFDM in TBST filtered thru 0.2 µm. Detection was done using Novolink HRP polymer from Leica following manufacturer's instructions. Primary antibody: dilution 1: 1000, incubated 30 min at RT (using Autostainer) Sections were counterstained with Harris Hematoxylin.
Rabbit antibody to Nav1.8 IHC on paraffin sections of human brain tissue using Rabbit antibody to Nav1.8: OSS00156W. HIER: 1 mM EDTA, pH 8 for 20 min using Thermo PT Module. Blocking: 0.2% LFDM in TBST filtered thru 0.2 µm. Detection was done using Novolink HRP polymer from Leica following manufacturer's instructions. Primary antibody: dilution 1: 1000, incubated 30 min at RT (using Autostainer) Sections were counterstained with Harris Hematoxylin.
Rabbit antibody to Nav1.8 IHC on paraffin sections of human brain tissue using Rabbit antibody to Nav1.8: OSS00156W. HIER: 1 mM EDTA, pH 8 for 20 min using Thermo PT Module. Blocking: 0.2% LFDM in TBST filtered thru 0.2 µm. Detection was done using Novolink HRP polymer from Leica following manufacturer's instructions. Primary antibody: dilution 1: 1000, incubated 30 min at RT (using Autostainer) Sections were counterstained with Harris Hematoxylin.
Rabbit antibody to Nav1.8 IHC on paraffin sections of human breast cancer tissue using Rabbit antibody to Nav1.8: OSS00156W. HIER: 1 mM EDTA, pH 8 for 20 min using Thermo PT Module. Blocking: 0.2% LFDM in TBST filtered thru 0.2 µm. Detection was done using Novolink HRP polymer from Leica following manufacturer's instructions. Primary antibody: dilution 1: 1000, incubated 30 min at RT (using Autostainer) Sections were counterstained with Harris Hematoxylin.
Rabbit antibody to Nav1.8 IHC on paraffin sections of human fallopian tissue using Rabbit antibody to Nav1.8: OSS00156W. HIER: 1 mM EDTA, pH 8 for 20 min using Thermo PT Module. Blocking: 0.2% LFDM in TBST filtered thru 0.2 µm. Detection was done using Novolink HRP polymer from Leica following manufacturer's instructions. Primary antibody: dilution 1: 1000, incubated 30 min at RT (using Autostainer) Sections were counterstained with Harris Hematoxylin.
Rabbit antibody to Nav1.8 IHC on paraffin sections of human placenta tissue using Rabbit antibody to Nav1.8: OSS00156W. HIER: 1 mM EDTA, pH 8 for 20 min using Thermo PT Module. Blocking: 0.2% LFDM in TBST filtered thru 0.2 µm. Detection was done using Novolink HRP polymer from Leica following manufacturer's instructions. Primary antibody: dilution 1: 1000, incubated 30 min at RT (using Autostainer) Sections were counterstained with Harris Hematoxylin.
Rabbit antibody to Nav1.8 IHC on paraffin sections of human prostate tissue using Rabbit antibody to Nav1.8: OSS00156W. HIER: 1 mM EDTA, pH 8 for 20 min using Thermo PT Module. Blocking: 0.2% LFDM in TBST filtered thru 0.2 µm. Detection was done using Novolink HRP polymer from Leica following manufacturer's instructions. Primary antibody: dilution 1: 1000, incubated 30 min at RT (using Autostainer) Sections were counterstained with Harris Hematoxylin.
Rabbit antibody to Nav1.8 IHC on paraffin sections of human testis tissue using Rabbit antibody to Nav1.8: OSS00156W. HIER: 1 mM EDTA, pH 8 for 20 min using Thermo PT Module. Blocking: 0.2% LFDM in TBST filtered thru 0.2 µm. Detection was done using Novolink HRP polymer from Leica following manufacturer's instructions. Primary antibody: dilution 1: 1000, incubated 30 min at RT (using Autostainer) Sections were counterstained with Harris Hematoxylin.
⚬ Products
Rabbit antibody to Nav1.8
Content

Download Protocols

APES coating of slides
Loading Buffer: Reducing
IHC-P on Autostainer
G1 Lysing Buffer
WB Protocol online
IHC-P HIER (Tris-EDTA, pH 9)
4% PFA
Davidson's fix (modified)
....Tissue lysate perparation
....G2 Lysing Buffer
....R Lysing Buffer
....G3 Lysing Buffer
....G4 Lysing Buffer
....G5 Lysing Buffer
....G6 Lysing Buffer
Content

Watch Videos

Autoperfuserâ„¢ OS2100
Red Carpet: A Histology Carpet for Slides