⚬ Services
Code
OSA00090W
$240USD    Buy Now 

ID Tag
Rb971-280609-WS

Immunogen
A synthetic peptide from the c-terminal region of rat Aquaporin 6 (AQP6) conjugated to an immunogenic carrier protein was used as the antigen.

Accession

Also known
Aquaporin-6, AQP-6, AQP6, Aquaporin6

Target
FUNCTION: Forms a water-specific channel that participates in distinct physiological functions such as glomerular filtration, tubular endocytosis and acid-base metabolism. Aquaporins contain two tandem repeats each containing three membrane-spanning domains and a pore-forming loop with the signature motif Asn-Pro-Ala (NPA).
Tissue specificity: Kidney.
SUBCELLULAR LOCATION: Cell membrane; Multi-pass membrane protein.

Storage
Maintain the lyophilised/reconstituted antibodies frozen at -20°C for long term storage and refrigerated at 2-8°C for a shorter term. When reconstituting, glycerol (1:1) may be added for an additional stability. Avoid freeze and thaw cycles.

Expiry Date
12 months after reconstitution

Shipping
This item will be shipped to you at ambient temperature in a lyophilised form.

References
1. Yasui M, et al. Proc. Natl. Acad. Sci. U.S.A. 96:5808-5813(1999)

Limitation
For research use only

Code
OSA00090W
$240USD    Buy Now 

Unit size
100 µl

Conjugate
Unconjugated antibody

Host
NZ white rabbit

Purity
Whole serum

Clonality
Polyclonal

Isotype
Polyclonal, whole serum

Applications
IHC, WB. A dilution of 1 : 300 to 1 : 2000 is recommended. The optimal dilution should be determined by the end user. Not yet tested in other applications.

Specificity
Specific for AQP6.

Spcs X-react.
Rat, mouse. Other species not yet tested.

Format
Lyophilised

Reconstitution
Reconstitute in 100 µl of sterile water. Centrifuge to remove any insoluble material.

Note
Control peptide is available at $120 per 50 μg. Please enquire sales@osenses.com

Code
OSA00090W
$240USD    Buy Now 


Rabbit antibody to AQP6

IHC on paraffin sections of mouse cerebellum tissue using Rabbit antibody to AQP6: OSA00090W.
HIER: 1 mM EDTA, pH 8 for 20 min using Thermo PT Module.
Blocking: 0.2% LFDM in TBST filtered thru 0.2 µm.
Detection was done using Novolink HRP polymer from Leica following manufacturer's instructions.
Primary antibody: dilution 1: 1000, incubated 30 min at RT (using Autostainer).
Sections were counterstained with Harris Hematoxylin.

Rabbit antibody to AQP6 IHC on paraffin sections of rat kidney tissue using Rabbit antibody to AQP6: OSA00090W. HIER: 1 mM EDTA, pH 8 for 20 min using Thermo PT Module. Blocking: 0.2% LFDM in TBST filtered thru 0.2 µm. Detection was done using Novolink HRP polymer from Leica following manufacturer's instructions. Primary antibody: dilution 1: 1000, incubated 30 min at RT (using Autostainer). Sections were counterstained with Harris Hematoxylin.
Rabbit antibody to AQP6 IHC on paraffin sections of rat kidney tissue using Rabbit antibody to AQP6: OSA00090W. HIER: 1 mM EDTA, pH 8 for 20 min using Thermo PT Module. Blocking: 0.2% LFDM in TBST filtered thru 0.2 µm. Detection was done using Novolink HRP polymer from Leica following manufacturer's instructions. Primary antibody: dilution 1: 1000, incubated 30 min at RT (using Autostainer). Sections were counterstained with Harris Hematoxylin.
Rabbit antibody to AQP6 IHC on paraffin sections of rat kidney tissue using Rabbit antibody to AQP6: OSA00090W. HIER: 1 mM EDTA, pH 8 for 20 min using Thermo PT Module. Blocking: 0.2% LFDM in TBST filtered thru 0.2 µm. Detection was done using Novolink HRP polymer from Leica following manufacturer's instructions. Primary antibody: dilution 1: 1000, incubated 30 min at RT (using Autostainer). Sections were counterstained with Harris Hematoxylin.
Rabbit antibody to AQP6 IHC on paraffin sections of rat kidney tissue using Rabbit antibody to AQP6: OSA00090W. HIER: 1 mM EDTA, pH 8 for 20 min using Thermo PT Module. Blocking: 0.2% LFDM in TBST filtered thru 0.2 µm. Detection was done using Novolink HRP polymer from Leica following manufacturer's instructions. Primary antibody: dilution 1: 1000, incubated 30 min at RT (using Autostainer). Sections were counterstained with Harris Hematoxylin.
Rabbit antibody to AQP6 IHC on paraffin sections of rat kidney tissue using Rabbit antibody to AQP6: OSA00090W. HIER: 1 mM EDTA, pH 8 for 20 min using Thermo PT Module. Blocking: 0.2% LFDM in TBST filtered thru 0.2 µm. Detection was done using Novolink HRP polymer from Leica following manufacturer's instructions. Primary antibody: dilution 1: 1000, incubated 30 min at RT (using Autostainer). Sections were counterstained with Harris Hematoxylin.
⚬ Products
Rabbit antibody to AQP6
Content

Download Protocols

APES coating of slides
Loading Buffer: Reducing
IHC-P on Autostainer
G1 Lysing Buffer
WB Protocol online
IHC-P HIER (Tris-EDTA, pH 9)
4% PFA
Davidson's fix (modified)
....Tissue lysate perparation
....G2 Lysing Buffer
....R Lysing Buffer
....G3 Lysing Buffer
....G4 Lysing Buffer
....G5 Lysing Buffer
....G6 Lysing Buffer
Content

Watch Videos

Autoperfuserâ„¢ OS2100
Red Carpet: A Histology Carpet for Slides