⚬ Services
Code
OSP00025W
$260USD    Buy Now 

ID Tag
Rb980-280609-WS

Immunogen
A synthetic peptide from mouse P2X7 conjugated to blue carrier protein was used as the antigen.

Accession

Also known
P2RX7, P2X purinoceptor 7, Purinergic receptor, P2Z receptor, ATP receptor

Target
FUNCTION: Receptor for ATP that acts as a ligand gated ion channel. Responsible for ATP-dependent lysis of macrophages through the formation of membrane pores permeable to large molecules. Could function in both fast synaptic transmission and the ATP-mediated lysis of antigen-presenting cells.
Subcellular location: Membrane; Multi-pass membrane protein.

Storage
Maintain the lyophilised/reconstituted antibodies frozen at -20°C for long term storage and refrigerated at 2-8°C for a shorter term. When reconstituting, glycerol (1:1) may be added for an additional stability. Avoid freeze and thaw cycles.

Expiry Date
12 months after reconstitution

Shipping
This item will be shipped to you at ambient temperature in a lyophilised form.

References
1. Chessell I.P, et al. FEBS Lett. 439:26-30(1998)

Limitation
For research use only

Related
products
 
Code Product Name
OSP00085G Rabbit antibody to P2RX7
 

Code
OSP00025W
$260USD    Buy Now 

Unit size
100 ul

Conjugate
Unconjugated antibody

Host
NZ white rabbit

Purity
Whole serum

Clonality
Polyclonal

Isotype
Polyclonal, whole serum

Applications
IHC, WB. A dilution of 1 : 1000 is recommended for IHC-P and 1:2000 for WB. The optimal dilution should be determined by the end user. Not yet tested in other applications.

Specificity
Specific for P2RX7.

Spcs X-react.
Mouse, human, rat, marmoset. Other species not yet tested.

Format
Lyophilised

Reconstitution
Reconstitute in 100 ul of sterile water. Centrifuge to remove any insoluble material.

Code
GSP00006P
$120USD   

ID Tag
68912-53

Unit size
50 µg

Accession

Also known
P2RX7, P2X purinoceptor 7, Purinergic receptor, P2Z receptor, ATP receptor

Target
This is the immunising peptide for the products Rabbit antibody to P2RX7 (OSP00025W and OSP00085G) and Goat antibody to P2RX7 (OSP00091W).

Purity
>85%

Applications
Control peptide

Format
Lyophilised

Reconstitution
This peptide is soluble.

Storage
Maintain refrigerated at 2-8°C for up to 12 months. After reconstitution keep at -20°C. Avoid freeze and thaw cycles.

Expiry Date
12 months after reconstitution

Shipping
This item will be shipped to you at ambient temperature in a lyophilised form.

References
1. Chessell I.P, et al. FEBS Lett. 439:26-30(1998)

Limitation
For research use only

Related Products
OSP00025W,OSP00085G

Code
OSP00025W
$260USD    Buy Now 


Rabbit antibody to P2RX7 IHC-P on paraffin sections of rat DRG.
The animal was perfused using Autoperfuser at a pressure of 130 mmHg with 300 ml 4% FA being processed for paraffin embedding. HIER: Tris-EDTA, pH 9 for 20 min using Thermo PT Module.
Blocking: 0.2% LFDM in TBST filtered thru 0.2 µm.
Detection was done using Novolink HRP polymer from Leica following manufacturers instructions; DAB chromogen: Candela DAB chromogen from Osenses.
Primary antibody: dilution 1: 1000, incubated 30 min at RT using Autostainer.
Sections were counterstained with Harris Hematoxylin
Rabbit antibody to P2RX7 IHC-P on paraffin sections of rat cerebellum. The animal was perfused using Autoperfuser at a pressure of 130 mmHg with 300 ml 4% FA being processed for paraffin embedding. HIER: Tris-EDTA, pH 9 for 20 min using Thermo PT Module. Blocking: 0.2% LFDM in TBST filtered thru 0.2 µm. Detection was done using Novolink HRP polymer from Leica following manufacturers instructions; DAB chromogen: Candela DAB chromogen from Osenses. Primary antibody: dilution 1: 1000, incubated 30 min at RT using Autostainer. Sections were counterstained with Harris Hematoxylin
Rabbit antibody to P2RX7 IHC-P on paraffin sections of rat brain. The animal was perfused using Autoperfuser at a pressure of 130 mmHg with 300 ml 4% FA being processed for paraffin embedding. HIER: Tris-EDTA, pH 9 for 20 min using Thermo PT Module. Blocking: 0.2% LFDM in TBST filtered thru 0.2 µm. Detection was done using Novolink HRP polymer from Leica following manufacturers instructions; DAB chromogen: Candela DAB chromogen from Osenses. Primary antibody: dilution 1: 1000, incubated 30 min at RT using Autostainer. Sections were counterstained with Harris Hematoxylin
Rabbit antibody to P2RX7 IHC-P on paraffin sections of rat brain. The animal was perfused using Autoperfuser at a pressure of 130 mmHg with 300 ml 4% FA being processed for paraffin embedding. HIER: Tris-EDTA, pH 9 for 20 min using Thermo PT Module. Blocking: 0.2% LFDM in TBST filtered thru 0.2 µm. Detection was done using Novolink HRP polymer from Leica following manufacturers instructions; DAB chromogen: Candela DAB chromogen from Osenses. Primary antibody: dilution 1: 1000, incubated 30 min at RT using Autostainer. Sections were counterstained with Harris Hematoxylin
Rabbit antibody to P2RX7 IHC-P on paraffin sections of rat brain. The animal was perfused using Autoperfuser at a pressure of 130 mmHg with 300 ml 4% FA being processed for paraffin embedding. HIER: Tris-EDTA, pH 9 for 20 min using Thermo PT Module. Blocking: 0.2% LFDM in TBST filtered thru 0.2 µm. Detection was done using Novolink HRP polymer from Leica following manufacturers instructions; DAB chromogen: Candela DAB chromogen from Osenses. Primary antibody: dilution 1: 1000, incubated 30 min at RT using Autostainer. Sections were counterstained with Harris Hematoxylin
Rabbit antibody to P2RX7 IHC-P on paraffin sections of rat cerebellum. The animal was perfused using Autoperfuser at a pressure of 130 mmHg with 300 ml 4% FA being processed for paraffin embedding. HIER: Tris-EDTA, pH 9 for 20 min using Thermo PT Module. Blocking: 0.2% LFDM in TBST filtered thru 0.2 µm. Detection was done using Novolink HRP polymer from Leica following manufacturers instructions; DAB chromogen: Candela DAB chromogen from Osenses. Primary antibody: dilution 1: 1000, incubated 30 min at RT using Autostainer. Sections were counterstained with Harris Hematoxylin
Rabbit antibody to P2RX7 IHC-P on paraffin sections of rat cerebellum. The animal was perfused using Autoperfuser at a pressure of 130 mmHg with 300 ml 4% FA being processed for paraffin embedding. HIER: Tris-EDTA, pH 9 for 20 min using Thermo PT Module. Blocking: 0.2% LFDM in TBST filtered thru 0.2 µm. Detection was done using Novolink HRP polymer from Leica following manufacturers instructions; DAB chromogen: Candela DAB chromogen from Osenses. Primary antibody: dilution 1: 1000, incubated 30 min at RT using Autostainer. Sections were counterstained with Harris Hematoxylin
Rabbit antibody to P2RX7 IHC-P on paraffin sections of rat cerebellum. The animal was perfused using Autoperfuser at a pressure of 130 mmHg with 300 ml 4% FA being processed for paraffin embedding. HIER: Tris-EDTA, pH 9 for 20 min using Thermo PT Module. Blocking: 0.2% LFDM in TBST filtered thru 0.2 µm. Detection was done using Novolink HRP polymer from Leica following manufacturers instructions; DAB chromogen: Candela DAB chromogen from Osenses. Primary antibody: dilution 1: 1000, incubated 30 min at RT using Autostainer. Sections were counterstained with Harris Hematoxylin
Rabbit antibody to P2RX7 IHC-P on paraffin sections of rat cerebellum. The animal was perfused using Autoperfuser at a pressure of 130 mmHg with 300 ml 4% FA being processed for paraffin embedding. HIER: Tris-EDTA, pH 9 for 20 min using Thermo PT Module. Blocking: 0.2% LFDM in TBST filtered thru 0.2 µm. Detection was done using Novolink HRP polymer from Leica following manufacturers instructions; DAB chromogen: Candela DAB chromogen from Osenses. Primary antibody: dilution 1: 1000, incubated 30 min at RT using Autostainer. Sections were counterstained with Harris Hematoxylin
Rabbit antibody to P2RX7 IHC-P on paraffin sections of rat DRG. The animal was perfused using Autoperfuser at a pressure of 130 mmHg with 300 ml 4% FA being processed for paraffin embedding. HIER: Tris-EDTA, pH 9 for 20 min using Thermo PT Module. Blocking: 0.2% LFDM in TBST filtered thru 0.2 µm. Detection was done using Novolink HRP polymer from Leica following manufacturers instructions; DAB chromogen: Candela DAB chromogen from Osenses. Primary antibody: dilution 1: 1000, incubated 30 min at RT using Autostainer. Sections were counterstained with Harris Hematoxylin
Rabbit antibody to P2RX7 IHC-P on paraffin sections of rat DRG. The animal was perfused using Autoperfuser at a pressure of 130 mmHg with 300 ml 4% FA being processed for paraffin embedding. HIER: Tris-EDTA, pH 9 for 20 min using Thermo PT Module. Blocking: 0.2% LFDM in TBST filtered thru 0.2 µm. Detection was done using Novolink HRP polymer from Leica following manufacturers instructions; DAB chromogen: Candela DAB chromogen from Osenses. Primary antibody: dilution 1: 1000, incubated 30 min at RT using Autostainer. Sections were counterstained with Harris Hematoxylin
Rabbit antibody to P2RX7 IHC-P on paraffin sections of rat cerebellum. The animal was perfused using Autoperfuser at a pressure of 130 mmHg with 300 ml 4% FA being processed for paraffin embedding. HIER: Tris-EDTA, pH 9 for 20 min using Thermo PT Module. Blocking: 0.2% LFDM in TBST filtered thru 0.2 µm. Detection was done using Novolink HRP polymer from Leica following manufacturers instructions; DAB chromogen: Candela DAB chromogen from Osenses. Primary antibody: dilution 1: 1000, incubated 30 min at RT using Autostainer. Sections were counterstained with Harris Hematoxylin
Rabbit antibody to P2RX7 IHC-P on paraffin sections of rat cerebellum. The animal was perfused using Autoperfuser at a pressure of 130 mmHg with 300 ml 4% FA being processed for paraffin embedding. HIER: Tris-EDTA, pH 9 for 20 min using Thermo PT Module. Blocking: 0.2% LFDM in TBST filtered thru 0.2 µm. Detection was done using Novolink HRP polymer from Leica following manufacturers instructions; DAB chromogen: Candela DAB chromogen from Osenses. Primary antibody: dilution 1: 1000, incubated 30 min at RT using Autostainer. Sections were counterstained with Harris Hematoxylin
Rabbit antibody to P2RX7 WB on brain lysates. Blocking: 1% LFDM for 30 min at RT; primary antibody: dilution 1:2000 incubated at 4C overnight. Click on eLAB BOOK tab to see the details.
⚬ Products
Rabbit antibody to P2RX7
Content

Download Protocols

APES coating of slides
Loading Buffer: Reducing
IHC-P on Autostainer
G1 Lysing Buffer
WB Protocol online
IHC-P HIER (Tris-EDTA, pH 9)
4% PFA
Davidson's fix (modified)
....Tissue lysate perparation
....G2 Lysing Buffer
....R Lysing Buffer
....G3 Lysing Buffer
....G4 Lysing Buffer
....G5 Lysing Buffer
....G6 Lysing Buffer
Content

Watch Videos

Autoperfuser™ OS2100
Red Carpet: A Histology Carpet for Slides